Move OEM airvents, switch panel, and cigarette lighter to the new bezel.
The main harness for 2019 - 2021 may be different from that of 2022 and later model years. If connectors not matching with OEM ones, you may need to request a different main harness.
You may have two 8 pin connectors at the back of OEM screen and AC panel. Connect the one that gives you hazard light control to our canbus board.
Connect matching connectors to the vehicle. Leave unmatched ones disconnected.
FM/AM radio antenna adapter usually connects to the white or black FAKRA connector in the vehicle. GPS antenna adapter can be connected to the blue, yellow, or cyan FAKRA connector in the vehicle. Check radio and GPS signal after connection to make sure they are good.
To make connections to the head unit, just match connectors and/or labels. If on-screen AC control is not working, check if 8 pin connector with green and green/black or white and white/black wires is connected to the back of the unit.
To retain OEM camera(s),connect red FAKRA connector from the vehicle to the one at the back of our unit, and connect male RCA labeled 'Camera' from the canbus board and female RCA labeled 'CCD Camera'. Do NOT use the 'CAMERA' male RCA coming from the vehicle directly.
